DENALI T3 Ultra-Viz 4-in-1 Motorcycle Safety & Visibility Lighting Kit positions switchback pods for 360° visibility with four functions, white DRL, amber turn, rock light, and puddle light. It enhances safety, trail visibility and nighttime parking illum

DENALI TriOptic™ Lens Kit enhances visibility in fog and rain. It includes amber and selective yellow lenses to reduce glare, boost daytime visibility and multiple lens options of Spot, Hybrid, or Spot-Hybrid for maximum distance and close-range fill.

DENALI Plug-&-Play T3 Turn Signal Wiring Adapter Kit enables a direct connection between front T3 pods and the Africa Twin 1100’s factory turn signal harness. Includes color-coded adapters, supports amber DRL flashing in sync and works with aftermarket si

DENALI SoundBomb Mini Horn Mount enables to mount the the DENALI SoundBomb Mini in the optimum location on your KTM bike.

DENALI Wiring Adapter | CANsmart™ EURO 5 Pass-Through lets you add extra accessories when a CANsmart™ Controller is already installed. Ideal for fuel management systems or a second CANsmart™, it provides an additional connector for simple plug-&-play inte

DENALI Engine Guard Mount to mount T3 Signal Pods cleanly to 1.25in engine guards or crash bars. These mounts made from low-profile ABS brackets. They secure with 3M foam tape, include wire routing options and provide a factory-integrated look for cruiser

DENALI Snap-On X-Lens For D14 Destroyer Headlight is used to transform D14 Destroyer Headlight. Switch between selective yellow, amber or clear for enhanced visibility, reduced glare in wet/foggy conditions or stylish protection, all in one modular design

DENALI Flush Mount is to mount DENALI DRL or B6 Visibility Pod to any flat surface. This Flush Mount  is build from powder-coated steel. Perfect for mounting DRLs to body panels and hand guards or B6 brake pods on rear bumper or on the back of your luggag

DENALI Fender Mount is to mount a pair of DENALI DRL or B6 Pods 90° to any M6 point with this powder-coated steel bracket kit. Perfect for fender-mounted DRLs, backup lights on ATVs or rear-mounted B6 brake pods for enhanced visibility.

DENALI Driving Light Mount is a vehicle-specific light mount for your particular models of KTM. This mount positions DENALI driving lights in the optimal location on your motorcycle. Includes durable powder-coated steel brackets with M8 mounting hole and

DENALI DialDim Universal Trigger Wire Harness is a replacement for the wire harness which comes with Universal DialDim Lighting Controller.

DENALI Driving Light Extension Cable with Y-splitter lets you extend one light output into two, increasing distance between pods and your wiring harness. Works plug-and-play with DENALI or third-party controllers.

DENALI Turn Signal Load Resistors (20 Ohm/10Ohm) prevent hyper flashing when replacing 10W/21W incandescent signals with DENALI LED signals. One resistor is required per turn signal for proper function and compatibility on your motorcycle.

DENALI KTM CANsmart™ Control Switch lets you independently toggle and adjust intensity for two KTM CANsmart auxiliary light sets. Includes 7/8" handlebar mount and DrySeal™ construction with watertight housing, ensuring reliable performance even when subm

DENALI TriOptic™ Lens Kit For D7 LED Lights enhances visibility in fog and rain. It includes amber and selective yellow lenses to reduce glare, boost daytime visibility.

DENALI TriOptic™ Lens Kit For D4 LED Lights enhances visibility in fog and rain. It includes amber and selective yellow lenses to reduce glare, boost daytime visibility and multiple lens options of Spot, Hybrid, or Spot-Hybrid for maximum distance and clo

DENALI S4 Center Light Mount is a vehicle-specific light mount for your particular models of KTM. This mount positions a single DENALI S4 Driving Light Pod tucked into front headlight assembly. Includes durable powder-coated steel brackets with M8 mountin

DENALI Brake Light Wiring Adapter enables installation of DENALI B6 Brake Lights on the Ducati DesertX. Plugs in-line at the brake light connector, draws running light power from the accessory circuit and includes an optional 3-wire pigtail for T3 signals

DENALI Plug-&-Play Rear T3 Wiring Adapter is for KTM 1290 Adventure R/S. It enables plug-&-play connection between Rear T3 Switchback Turn Signals and the KTM 1290 Adventure R/S.

DENALI DialDim™ Switch Extension can be used to extend the lead of DialDim Controller Switch by 48 inches.

DENALI Plug-&-Play B6 Brake Light Wiring Adapter enables a direct connection between your B6 LED brake light and Honda Africa Twin 1100 OEM harness. Just plug it in, no splicing or wiring modifications needed for quick and clean installation.

DENALI Wiring Adapter connects the B6 LED Brake Light to the OEM KTM harness with a true plug & play setup. No wire tapping or modifications needed. It is just a simple, direct installation for seamless brake light integration.

DENALI DRL & B6 Brake Light Extension Cable can be used to extend the lead of your B6 or DRL light by 48 inches.