DENALI Wiring Adapter connects the B6 LED Brake Light to the OEM KTM harness with a true plug & play setup. No wire tapping or modifications needed. It is just a simple, direct installation for seamless brake light integration.

DENALI Switch | Eliminator Plug replaces your standard ON-OFF switch, automatically powering your lights with the ignition for convenient, worry-free operation anytime your bike is running.

DENALI Switch | DrySeal™ HI-LOW-OFF 3-Way Waterproof Switch replaces standard ON-OFF controls, providing independent dimming and full control of auxiliary lights. Features DrySeal™ construction with molded silicone seals for 100% waterproof protection, ev

DENALI Switch DrySeal™ ON-OFF Waterproof Illuminated handles up to 15A for auxiliary lights and accessories. Fully waterproof with molded silicone seals and potted wire entry. Includes 7/8in & 1in handlebar mounts plus adhesive pad for versatile installat

DENALI Driving Light Extension Cable allows to increase the length between DENALI driving light pods and DENALI wiring harness and controllers. This cable is included in Universal DialDim Kit.

DENALI DialDim Universal Trigger Wire Harness is a replacement for the wire harness which comes with Universal DialDim Lighting Controller.

DENALI DRL & B6 Brake Light Extension Cable can be used to extend the lead of your B6 or DRL light by 48 inches.

DENALI Driving Light Extension Cable with Y-splitter lets you extend one light output into two, increasing distance between pods and your wiring harness. Works plug-and-play with DENALI or third-party controllers.

DENALI T3 Ultra-Viz 4-in-1 Motorcycle Safety & Visibility Lighting Kit positions switchback pods for 360° visibility with four functions, white DRL, amber turn, rock light, and puddle light. It enhances safety, trail visibility and nighttime parking illum

DENALI Switch Mount Perch mounts DrySeal™ waterproof switches to your motorcycle’s clutch or brake perch using M5 or M6 bolts (horizontal or vertical).

DENALI Lens Kit for D3 Fog Lights lets you swap in amber or selective yellow lenses to boost visibility in fog and rain by filtering blue light. Works only with D3 fog lights and not compatible with D3 TriOptic models.

DENALI TriOptic™ Lens Kit enhances visibility in fog and rain. It includes amber and selective yellow lenses to reduce glare, boost daytime visibility and multiple lens options of Spot, Hybrid, or Spot-Hybrid for maximum distance and close-range fill.

DENALI Snap-On X-Lens for D14 Destroyer Headlight lets you instantly change the D14 Destroyer Headlight’s low beam color to amber, selective yellow, or clear. Enhance visibility, cut glare in wet/foggy conditions or protect optics in style with snap-on mo

DENALI S4 LED Light Pod delivers 3066 lumens with Cree LEDs, a sealed beam lens, and DataDim™ plug-&-play dimming. Features DrySeal™ waterproof housing, Impact PC™ bezels, LiveActive™ cooling, and a low-profile stainless bracket for extreme durability.

DENALI B6 LED Brake Light Kit With License Plate Mount adds unmatched rear visibility. Ultra-bright in a compact, low-profile housing, it offers running and brake light circuits, 180° visibility, IP67 waterproofing and CANsmart™ compatibility for flash pa

DENALI Plug-&-Play Rear T3 Wiring Adapter adds bright red running, brake, and turn lights with a plug-&-play adapter and license plate mount for boosting rear visibility and safety. Matches factory LED styling for Tiger Sport 660.

DENALI Plug-&-Play T3 Turn Signal Wiring Adapter Kit enables a direct connection between front T3 pods and the Africa Twin 1100’s factory turn signal harness. Includes color-coded adapters, supports amber DRL flashing in sync and works with aftermarket si

DENALI Turn Signal Load Resistors (20 Ohm/10Ohm) prevent hyper flashing when replacing 10W/21W incandescent signals with DENALI LED signals. One resistor is required per turn signal for proper function and compatibility on your motorcycle.

DENALI T3 Switchback M8 LED Turn Signals features white DRL with amber turn signal, dual-intensity DRL (50%/100%), six high-power LEDs, 180° viewing angle, low-profile design, E-Mark approved, easy vehicle connection and low 12V power draw.

DENALI CANsmart Wiring Harness for T3 Switchback Signals provides a true plug-&-play connection to GEN II CANsmart™ Controllers. Power up to 4 T3 lights with no splicing required. Easily configure front or rear setups while ensuring seamless DRL, turn and

DENALI T3 Modular Switchback Signal Pods features white DRL with amber turn signal, dual-intensity DRL (50%/100%), six high-power LEDs, 180° viewing angle, low-profile design, E-Mark approved, easy vehicle connection, 870 lumens and low power draw.

DENALI DL9 Driving Light W/ DataDim Technology delivers 15,300 lumens per pair with HiDrive Cree LEDs and oversized TIR hybrid optics for unmatched distance and width. Features DataDim™ dimming, DrySeal™ waterproofing, UV-coated polycarbonate lenses and m

DENALI DL6 Driving Light W/ DataDim Technology delivers 10,200 lumens per pair with HiDrive Cree LEDs and oversized TIR hybrid optics for unmatched distance and width. Features DataDim™ dimming, DrySeal™ waterproofing, UV-coated polycarbonate lenses and m

DENALI DL4 Driving Light W/ Datadim Technology delivers 6,800 lumens per pair with HiDrive Cree LEDs and oversized TIR optics for unmatched beam distance and width. Features DataDim™ dimming, DrySeal™ waterproofing, UV-coated polycarbonate lenses and more