Assembly & Accessories

DENALI Flush Mount is to mount DENALI DRL or B6 Visibility Pod to any flat surface. This Flush Mount  is build from powder-coated steel. Perfect for mounting DRLs to body panels and hand guards or B6 brake pods on rear bumper or on the back of your luggag

DENALI Fender Mount is to mount a pair of DENALI DRL or B6 Pods 90° to any M6 point with this powder-coated steel bracket kit. Perfect for fender-mounted DRLs, backup lights on ATVs or rear-mounted B6 brake pods for enhanced visibility.

DENALI Lower Driving Light Mount is a vehicle-specific light mount for your particular models of Ducati. This mount positions DENALI lower driving lights in the optimal location. Includes durable powder-coated steel brackets with M8 mounting hole and all

DENALI Driving Light Mount is a vehicle-specific light mount for your particular models of KTM. This mount positions DENALI driving lights in the optimal location on your motorcycle. Includes durable powder-coated steel brackets with M8 mounting hole and

DENALI Plug-&-Play B6 Brake Light Wiring Adapter enables a direct connection between your B6 LED brake light and Honda Africa Twin 1100 OEM harness. Just plug it in, no splicing or wiring modifications needed for quick and clean installation.

DENALI Wiring Adapter | CANsmart™ Pass-Through used to split your Harley-Davidson diagnostic port, allowing both the CANsmart™ Controller and another accessory to connect simultaneously without losing CAN bus functionality.

DENALI Switch | DrySeal™ HI-LOW-OFF 3-Way Waterproof Switch replaces standard ON-OFF controls, providing independent dimming and full control of auxiliary lights. Features DrySeal™ construction with molded silicone seals for 100% waterproof protection, ev

DENALI Driving Light Extension Cable allows to increase the length between DENALI driving light pods and DENALI wiring harness and controllers. This cable is included in Universal DialDim Kit.

DENALI DRL & B6 Brake Light Extension Cable can be used to extend the lead of your B6 or DRL light by 48 inches.

DENALI Turn Signal Load Resistors (20 Ohm/10Ohm) prevent hyper flashing when replacing 10W/21W incandescent signals with DENALI LED signals. One resistor is required per turn signal for proper function and compatibility on your motorcycle.

Technical set which can be used to install your Dayron indicators of Kellermann. Complete the integration of your daytime running light into the on-board electronics via DRL device! The Dayron daytime running light system is installed with the support of

Parts that are original and of the highest calibre. Appropriate for every Ténéré 700 starting with the 2019 build year.

It has a crisp and short tail which gives a sporty look to your bike but it not really suitable for off-road use.

DENALI Wiring Harness For DRL Lights powers two DRL Light Pods with waterproof connectors and sealed switch, allowing independent dimming separate from OEM lights. Engineered for harsh conditions, the switch can be bar or flush mounted for versatile insta

DENALI Upper Driving Light Mount is a vehicle-specific light mount for your particular models of BMW. This mount positions DENALI driving lights in the optimal location on your motorcycle. Includes durable powder-coated steel brackets with M8 mounting hol

DENALI CANsmart Wiring Harness for T3 Switchback Signals provides a true plug-&-play connection to GEN II CANsmart™ Controllers. Power up to 4 T3 lights with no splicing required. Easily configure front or rear setups while ensuring seamless DRL, turn and

The EVO headlights from SW-Motech can be fastened to crash bars or tubular car parts, for instance, with the aid of these clamps.

The stable, unbreakable steel tube construction is easy to jack up, provides the best angle and ground clearance, and is impervious to damage even under extreme conditions. Easy mounting and high cornering clearance thanks to bike-specific design.

LUMISTRATION KITS

DENALI Wiring Adapter | CANsmart™ EURO 5 Pass-Through lets you add extra accessories when a CANsmart™ Controller is already installed. Ideal for fuel management systems or a second CANsmart™, it provides an additional connector for simple plug-&-play inte

DENALI Lower Driving Light Mount is a vehicle-specific light mount for your particular models of KTM. This mount positions DENALI lower driving lights in the optimal location on your motorcycle. Includes durable powder-coated steel brackets with M8 mounti

DENALI Driving Light Mounts fit any DENALI LED Light Kit to inner fork tubes. Featuring an octagonal profile, adjustable grip range, and a rotatable mounting shelf, they ensure a secure, versatile, and robust lighting solution.

DENALI Plug-&-Play T3 Turn Signal Wiring Adapter Kit enables a direct connection between front T3 pods and the Africa Twin 1100’s factory turn signal harness. Includes color-coded adapters, supports amber DRL flashing in sync and works with aftermarket si