Collection

Guards against filth and abrasion from boots on the painted frame braces above the footpegs. The swing arm bearings' exposed openings should be covered.

The motorcycle's upper portion, particularly the tank and fairing, is effectively protected by the tank protection bar. The engine side covers are effectively shielded by the engine protection bar.

For better handling and a more upright seating position. The original handlebars may be elevated by 28 mm and moved back by 16 mm with the help of stable offset blocks.

Suiting an off-road appearance. Very stable and good protection for heavier objects. blackened so that nothing reflects or sparkles.

Designed for the original fairing screen, the inclination may be adjusted constantly without the use of any tools, allowing for precise targeting of the flow behaviour.

Rain protection is provided by 210D polyamide inner bags that are waterproof and constructed of water-resistant material.

No alterations to the motorcycle are necessary because to the installation's dependability and simplicity.

The 50-millimeter diameter of these crash pads made of abrasion-resistant plastic adds to the drive shaft's safety by creating a sizable contact surface for the best possible force distribution.

Best fit is ensured thanks to bike-specific design.Thanks to the silver anodized coating, corrosion is prevented.

The foot brake cylinder is shielded by a folded, laser-cut aluminium cover, even from unintended boot contact.

Bigger surface area and toothed roughness of the brake translate into larger tread.

The stable, unbreakable steel tube construction is easy to jack up, provides the best angle and ground clearance, and is impervious to damage even under extreme conditions.

No alterations to the motorcycle are needed, and the installation is trustworthy and simple.

No alterations to the motorcycle are needed, and the installation is trustworthy and simple.

When maximum beam distance is sought to boost visibility and safety while riding over long distances on or off road, EVO high beam lights are suitable.

BACKUP LIGHT GUARDS.

Shields a motorcycle boot from coming into contact with a hot exhaust, chain, or swinging motions. Easily attaching to already-existing attachment points.

For tank bags in the ION series, the fiberglass-reinforced polyamide ION tank ring provides a stable hold. To refuel the bike, the ION tank bag may be instantaneously removed.

LUMISTRATION KITS.

For the finest fit and specialised solutions, use a bike-specific adapter ring. You can remove the PRO tank bag with in one motion thanks to quick release via pull straps.

The abrasion-resistant plastic crash padding for the swing arm add to its safety. The pads are perfectly shaped to match the motorcycle's appearance. Simple installation on the rear axle.

Built of sturdy steel and a 22 mm pipe diameter. Black powder coating that is resistant to weather and corrosion. Easily installed with screws on the original attachment points.

Easy fitting on to SW-MOTECH centerstand using existing points with two screws and two rubber. Encased clamps, the engine guard extension covers the strut deflection when driving.

Built of sturdy steel and a 22 mm pipe diameter. Development of the fairing protection specifically for bikes ensures a tight fit.