Collection

Original cylinder head gasket for the Ténéré 700.

The Ténéré 700's original alternator cover seal.

Original Ténéré 700 rectifier.

The horn, which is normally quite exposed, may be swiftly and simply moved under the left side panel, where it will be fully hidden, thanks to this sheet metal. There is no need to modify the electrics!

Efficient while switching to small indicators. Delivery 3-pin System connector to 2 Japan socket; 1 pair for 2 indications. There is also a set of 3 system plugs for self-construction.

With backlighting strips! approved for usage in the front and back. White or black plastic housing, smoked glass, and 12 V. M8 bolt, rubber-mounted, approximately 62 mm in length and 20 mm in depth; 1 pair; e-approved.

With backlighting strips! approved for usage in the front and back. White or black plastic housing, smoked glass, and 12 V. M8 bolt, rubber-mounted, approximately 62 mm in length and 20 mm in depth; 1 pair; e-approved.

Temperature sensor for the coolant. a small part serving a crucial purpose. Installed as an original spare part on many YAMAHA motorcycles, notably the Ténéré 700.

Ténéré700 (XTZ690), Tracer700, XSR700, MT-07.

Cush drive rubbers harden and shrink as they age. Please inspect the rear sprocket cush drive frequently as worn cush drive rubbers may harm it. Change rubbers always in sets (please be mindful of order quantity), priced per unit.

Fits the machine's sporty appearance perfectly. At the conveniently located attaching locations, simple and straightforward assembly is required. Black powder-coated, custom-fit form, no ABE necessary.

The Ténéré 700's athletic appearance and the style of our KEDO accessory line are perfectly complemented by this sturdy protective cover for the exposed foot brake pump.

Guards against filth and abrasion from boots on the painted frame braces above the footpegs. The swing arm bearings' exposed openings should be covered.

Guards against filth and abrasion from boots on the painted frame braces above the footpegs. The swing arm bearings' exposed openings should be covered.

Available with a matt surface in either black or translucent. whole 8-piece set that is provided.

Headlight Guard - Clear Lens, OEM, for off-road use only, no tools needed for assembly or disassembly.

A powder-coated steel plate provides the robust installation of the GPS mount on the original attachment points in the cockpit in order to obtain optimal alignment.

Individually adjustable: original height or 15 mm lower footrest for more comfort when riding with a broad foot area.

No alterations to the motorcycle are needed, and the installation is trustworthy and simple.

No alterations to the motorcycle are needed, and the installation is trustworthy and simple.

The 50 millimetre diameter of these crash pads, which are made of abrasion-resistant plastic, creates a sizable contact surface for the best force distribution possible, adding to the drive shaft's safety.

Shields a motorcycle boot from coming into contact with a hot exhaust, chain, or swinging motions. Easily attaching to already-existing attachment points.

Simple mounting on the original footrest mount. Increased comfort while riding due to the big foot area when adjusted individually: original. A top surface made of detachable rubber and high-quality, corrosion-resistant cast stainless steel.

The ION series tank bags are held firmly in place by the fiberglass-reinforced polyamide ION tank ring. Straightforward installation on the original connection points close to the fuel tank entrance.